Parameter select button, Thl and ratio led, Atk and rls led – Panasonic WR-DA7 User Manual

Page 136: Dly and gain led

PARAMETER SELECT Button

Pressing the

PARAMETER SELECT button changes the parameters to be

adjusted by the

and

knobs. Repeated pressing of this button cycles

the four choices: threshold or ratio—>attack or release—>delay or gain

threshold or release. The appropriate LED will light

(orange) showing which

set of parameters are in use:

THL and RATIO, ATK and RLS, DLY and GAIN.

No LED will light when the

THL and the RLS are in GATE mode.

Additionally, when in

GATE mode, the top knob toggles between THL

(threshold) and

ATK (attack).

THL and RATIO LED

When this LED is illuminated (orange),

THL (threshold) and RATIO

attributes for the

COMPRESSOR can be adjusted. The

knob

adjusts the threshold level, and the

knob adjusts the ratio level.

These parameters can also be adjusted in the

[DYNAMICS] window by

highlighting the selection soft knob, and turning the

JogDial to

change the level.

ATK and RLS LED

When this LED is illuminated (orange),

ATK (attack) and RLS (release)

attributes for the

COMPRESSOR can be adjusted. The

knob

adjusts the attack level, and the

knob adjusts the release level.

These parameters can also be adjusted in the

[DYNAMICS] window by

highlighting the selection soft knob, and turning the

JogDial to

change the level.

DLY and GAIN LED

When this LED is illuminated (orange),

DLY for the channel and GAIN

attributes for the

COMPRESSOR can be adjusted. The

knob

adjusts the delay time of the channel, and the

knob adjusts the

gain. You can adjust the Delay in either msec or samples. Simply select
the field you wish to adjust on the

[CHANNEL] window on the LCD.

These parameters can also be adjusted in the

[DYNAMICS] window by

highlighting the selection soft knob, and turning the

JogDial to

change the level.

C h a p t e r 9

D A 7 U s e r s ’ G u i d e

Dynamics/

Delay