Midi setup] area, Gen. rx button – Panasonic WR-DA7 User Manual

Page 157

C h a p t e r 1 1

D A 7 U s e r s ’ G u i d e

MIDI

[MIDI SETUP] Area

Here, the direction of messages (serial data) coming from and going to

MIDI

IN, MIDI OUT, and TO PC is set. Select one of these four combinations to
set the direction of data:

Status 1: When

is set to

and

is set to

, the DA7

cannot communicate with the personal computer. Data can be
transmitted and received between the DA7 and a MIDI device. A
message is input from the MIDI device to the

MIDI IN terminal, while

the DA7 outputs a message to the MIDI device from its

MIDI OUT

terminal.

Status 2: When

is set to

and

is set to

, the

DA7 can receive messages from the MIDI device and transmit messages
to the personal computer. The personal computer and the MIDI device
can communicate with each other via the DA7.

Status 3: When

is set to

and

is set to

, the

DA7 can receive messages from the personal computer and transmit
messages to

MIDI OUT.

Status 4: When

is set to

and

is set to

, the

DA7 can communicate only with the personal computer.

Button

Set the

MIDI input port by pressing the ENTER button. Rotate the JogDial

to set

. Cursor to

on the

line, and press the

ENTER

button to display either

Cursor to

on the

line, and rotate the

JogDial to display one of the

channels, 1 through 16 and omni [OM] for the DA7. The DA7 is controlled
by a message from the selected port, either

[MIDI] or [ToPC].

MIDI SETUP Area