Gate operations – Panasonic WR-DA7 User Manual

Page 144

Gate Operations

Set the status the same way you selected

mode in the

[DYNAMICS] window.

Cursor to

[ATK], [THL] or [RELEASE] in the [GATE] area, and adjust

the parameter using the

JogDial. The adjusted parameter is graphically

displayed on the screen. When a signal is input, gain reduction for the
input signal is indicated in the

[GR] meter.

Expander Operations

Cursor to the

button in the

[FUNCTION] area, and press the

ENTER button to engage the expander.

When the

button is pressed, the

is disabled.

Select a parameter you want to adjust by operating the cursor on the
screen or the

PARAMETER SELECT button on the Top Panel.

Adjust the parameter by rotating the

JogDial, or use the

knob for

threshold, attack, and delay, and the

knob for ratio, release, and

range. The parameter title will be indicated in reverse video.

The adjusted parameter is graphically displayed on the screen. When a
signal is input, gain reduction for the input signal is indicated in the
[GR] meter, and the reference point of the [GR] meter is highlighted.

Delay Operations

Press the

DELAY ON LED button (green) on the Top Panel or the

DELAY ON button in the [DYNAMICS] window to activate the delay
function.

Move the cursor on the screen, or press the

PARAMETER SELECT

button to select the

[DLY] parameter.

Adjust the parameter by using the

JogDial or the

knob. The

parameter title will then be indicated in reverse video.

C h a p t e r 9

D A 7 U s e r s ’ G u i d e

1 2

Dynamics/

Delay