Mute grp] area, Equalizer] area – Panasonic WR-DA7 User Manual

Page 89

C h a p t e r 5

D A 7 U s e r s ’ G u i d e

Channels,

Library

, & Meters

[MUTE GRP] Area

A mute group is similar to a fader group. When a fader is assigned to an
already activated mute group, pressing the

ON LED button of the current

Channel Strip will affect the on and off status of all channels in that group.

To assign the current channel to a mute group, cursor to one of the mute
group

choices, , , ,

or ,

and press the

ENTER button.

To activate a mute group, change to the

[GROUP>MUTE GRP] window,

cursor to the group number status line in the

[MUTE GRP] window, and

press the

ENTER button.

See Chapter 13, Group for more information.

[EQUALIZER] Area

The

[EQUALIZER] area is displayed when you select a channel that supports

equalization. The equalizer graph reflects the equalizer characteristics that
you have set in the four-band parametric EQ, accessed by pressing the

[H],

[HM], [LM], or [L] buttons in the EQUALIZER section, and turning the
[Q], [FREQ], or [GAIN] knobs.

To activate the channel equalizer, cursor to the

button, and press the

ENTER button. The

button will toggle to

Alternatively, pressing the

EQ ON LED button in the EQUALIZER section

switches the equalizer for a selected channel off and on.

To view the

[EQUALIZER] window, cursor to the equalizer graph displayed,

and press the

ENTER button. The LCD switches to the [EQUALIZER]

window for the selected channel. Or, you can reach the

[EQUALIZER]

window by pressing the GAIN

knob in the

EQ section on the Top Panel.

When the

[AUTO DISP CHANGE] selection in the [UTILITY>CONFIG]

window is

, you can also display the

[EQUALIZER] window by either

pressing one of the LED buttons or by adjusting one of the knobs in the
EQUALIZER section.

See Chapter 7 for more information on the

EQUALIZER section.

SUB

OFF

[EQUALIZER] Area