2 channel window, Phantom power [+48v] area – Panasonic WR-DA7 User Manual

Page 85

C h a p t e r 5

D A 7 U s e r s ’ G u i d e

Channels,

Library

, & Meters

5-2 Channel Window

The

[CHANNEL] window is displayed on the LCD screen by pressing the

button in the

MASTER DISPLAY section of the Top Panel. When

the

[AUTO DISP CHANGE] selection in the [UTILITY>CONFIG] window is

, you can also display the

[CHANNEL] window by pressing one of the

AUX section LED buttons, or adjusting the AUX section LEVEL ON/OFF knob.

When

[AUTO CHANNEL SELECT] in the [UTILITY>CONFIG] window is

, you can display the

[CHANNEL] window by pressing the SELECT

button, or the

ON button, or adjusting the fader for any channel.

The

[CHANNEL] window areas reflect the current status of the selected

channel, and include indicators and controls for the primary functions of the
DA7. By using the

SELECT buttons on a Channel Strip, any channel can be

selected. The number of the selected channels appears in the

[taskbar] area

in the LCD, and the window information will reflect the newly selected
channel.

The following areas in the

[CHANNEL] window can be changed to user-

selected parameters using the cursor controls:

Phantom Power

[+48V] Area

A button is displayed when a

Channel Strip for inputs 1 through 8 is

selected, and should be engaged when the source microphone requires
phantom power. To turn power on, cursor to the

button, and press the

ENTER button. The

button will toggle to

OFF

CHANNEL

Channel Display Window

Taskbar

Window selection
buttons