Equalizer, Dynamics/delay – Panasonic WR-DA7 User Manual

Page 59

C h a p t e r 3

D A 7 U s e r s ’ G u i d e

Quick Start

Equalizer

The

EQUALIZER section contains controls for the adjustment of the

frequency characteristics for the selected channel.

Select a channel _ Press the

ON LED button (red) on a channel, and

press the

SELECT LED button (orange) for the channel.

Display the

[EQUALIZER] window _ Press the GAIN knob, and the LCD

screen will display the

[EQUALIZER] window.

Press the

EQ ON LED button _ This button toggles EQ on (green) and

off for the selected channel.

Select a frequency band button _ Activate the

H (high), HM (high-mid),

LM (low-mid), or L (low) frequency band by pressing the respective LED
button to turn it on (orange).

Adjust an EQ parameter _ Rotating the

Q, FREQ, or GAIN knobs will

give you enormous control over the timbre of the sound.

For a more detailed explanation of the Equalizer, refer to Chapter 7.

Dynamics/Delay

Each channel of the DA7 can have unique dynamics and/or delay processing
assigned to it.

Display the Dynamics window _ Press the

knob and the LCD will

display the

[DYNAMICS] window.

Activate the

DYNAMICS/DELAY section _ Press the DYNAMICS ON LED

button, which turns it on (green).

An alternate method for adjusting EQ is to use the

ARROW

buttons to move the cursor to the

[EQUALIZER] window soft

knob controls, and then use the

JogDial to adjust the parameters.

When the

[AUTO DISP CHANGE] selection in the

[UTILITY>CONFIG] window is

, the LCD screen will update

and display the respective window for the EQ or dynamics/delay
adjustment that is currently being performed.