Panasonic WR-DA7 - Manual (Page 40)

C h a p t e r 2
D A 7 U s e r s ’ G u i d e 2 - 1 9
2
DA7 T
our
There are three mixer functions with associated libraries: CHANNEL,
EQUALIZER, DYNAMICS/DELAY. The library feature allows you to store
and recall individual function parameters to a separate library. There are fifty
registers for each library, numbered 01 through 50.
The RECALL button opens the library window for the selected function.
This means that if the [CHANNEL] window was displayed when you pressed
the RECALL button, the CHANNEL library will be displayed. The same goes
for the EQUALIZER AND DYNAMICS/DELAY libraries. Once selected, the
parameter knob will allow you to scroll through the stored memories. After
you have chosen a memory, press the
RECALL button again and the selected
memory will be recalled to the currently selected function. You will also
automatically return to the main screen for the selected function.
While the library is displayed, pressing the STORE button will immediately
store the current function settings to the current memory location, unless the
memory location is write-protected.
See Chapter 5, Library for additional information.
Details on the Keypad, UNDO/REDO button, MMC/CURSOR button,
ARROW buttons, ENTER button, CURSOR MODE button, and JogDial
elements of the DA7 Top Panel are provided in Chapter 4 of the manual.
Headset Control Section
A stereo headset connector and the headset volume control are located
under the right front edge of the Top Panel of the DA7. The current
MONITOR A selection is always routed to the headset connector.
16 17
1 2
4 5
7 8
0
3
6
9
ABC DEF
JKL GHI MNO
TUV PQRS WXYZ
SHIFT LOCATE
SET REPLAY LOOP
LOOP
18
Keypad Cursor Control Section
Keypad and Cursor Control Section
ARROW buttons
ENTER button
CURSOR
MODE button
JogDial
UNDO/REDO button
MMC/CURSOR button