Setting of bulk command reception, Data transmission request and transmission, Receiving/sending data – Panasonic WR-DA7 User Manual

Page 167

C h a p t e r 1 1

D A 7 U s e r s ’ G u i d e

1 3

MIDI

Setting of Bulk Command Reception

Switch the setting

to receive a bulk data or bulk out transmission

request from outside by pressing the

ENTER button.

You can choose whether or not to ignore a request made by other devices.
Cursor to

[Rx], and press the ENTER button. Each time the button is pressed,

and toggles.

Data Transmission Request and Transmission

Press the

button to request transmission of selected data from

another DA7, and load the data. To cancel the operation, cursor to the
button and press the

ENTER button. When the operation is completed, the

indication of "during execution" disappears and the

button appears

as inverse video.

Press the

button to transmit selected data to a device.

To cancel the transmission, cursor to the

button and press the

ENTER

button. When the transmission is completed, the indication of "during
execution" disappears and the

button appears as inverse video.

Receiving/Sending Data

Display the

[MIDI>BULK] window.

Press the

MIDI button to display the [BULK] window.

Cursor to the desired data type using the

ARROW buttons, and press the

ENTER button. The selected button is shown as inverse video.

Press the

ARROW button to move the cursor to the right. Rotate the

JogDial to display the desired data name, and press the ENTER button.

To receive or send data collectively, cursor to the

button, and

press the

ENTER button. This setting permits simultaneous sending or

receiving of the nine kinds of data shown on the window.

To receive data from another DA7, cursor to the

button. To

send data from the DA7, cursor to the

button.

Press the

ENTER button to receive or send data.

If the

button is pressed, the DA7 sends a request message for

MIDI bulk dump to the device, which sends the requested data to the
DA7. Then operate the device to send data, if any device other than
another DA7 is connected.
Or,

If the

button is pressed, the DA7 sends the data specified by

the above operation to the device.

OFF