Peak hold] area, Bus/aux] meter window – Panasonic WR-DA7 User Manual

Page 100

[PEAK HOLD] Area

This area sets the peak hold

. Cursor to the selection button, and

press the

ENTER button. Peak hold dots will appear on the meter. The

current peak hold levels appear in the data fields of the

[PK] area. When

, hold time is 0.3 seconds. When

(infinity) is selected, the peak hold

indicator remains until overwritten by a new peak level or is turned

When the

SELECT LED button of any channel is pressed, the [METER]

window for the selected channel appears.

Cursor to the

or the

button in the

[RESPONSE] area, and press the

ENTER button. The selected button will be highlighted. This setting is
common to all of the input and output channel windows, the panel, and the
Display Bridge. The setting from the factory when the DA7 is first turned on
is .

To cancel the peak hold function, cursor to the

button, and press the

ENTER button. The

button will toggle to

. To reset the infinite hold,

cursor to the

button, and press the

ENTER button.

[BUS/AUX] Meter Window

This window has meters for

[BUS], [AUX SEND], [AUX RETURN], and

[MASTER], and permits meter operation modes adjustments for
[RESPONSE], [POSITION], and [PEAK HOLD].

The

[RESPONSE], [POSITION], and [PEAK HOLD] operations are the

same as in the

[INPUT 1-32] window. However, you can have inputs selected

while the

meters are set to

OFF

C h a p t e r 5

D A 7 U s e r s ’ G u i d e

1 8

Channels,

Library

&Meters

BUS/AUX Meter Window