4 link/str window – Panasonic WR-DA7 User Manual

Page 199

C h a p t e r 1 3

D A 7 U s e r s ’ G u i d e

Group

13-4 LINK/STR Window

Use this window to designate the adjacent channel pairs that are to operate
as a fader linked pair or stereo pair. Pairs can be set for inputs, aux returns,
aux sends, and buses.

The channel pairs are established from left to right for the channel strips of
the DA7, beginning with the lower-number, odd-numbered channel. You
cannot establish a pair with channels 6 and 7, for example. Channel 6 can
only be paired with channel 5.

The

and

buttons toggle in the

[LINK/STR] window. When an existing

button in the window is selected with the cursor, pressing the

ENTER

button activates the associated channel pair, and the

button will be

replaced by an

button in the window.

When a channel pair has been activated in the

[LINK/STR] window, the

settings of the odd-numbered channel are copied to the even-numbered
channel, and the balance value is set to the center.

LINK/STR Window

You can also create a channel pair by simultaneously pressing the
appropriate channel

SELECT LED buttons, when the

[CHANNEL] window [LINK] area is

. To cancel,

simultaneously press the buttons a second time.