Creating a mute group – Panasonic WR-DA7 User Manual

Page 198

Creating a Mute Group

There are two methods for assigning a channel to a mute group while the
[MUTE GRP] windows are displayed.

Pressing a channel

SELECT LED button on the Top Panel to select the

channel (orange) will add the channel to the current mute group. If the
group selection marker is not positioned within the table which
includes the selected channel, the marker shifts to the relevant table
automatically. A registration mark will be displayed in the appropriate
[MUTE GRP] window table, denoting the channel selection for the
respective group.

Pressing the

ENTER button in the cursor mode while the cursor is

positioned on the desired channel number will register the channel to
the current mute group. A registration mark will be displayed denoting
the channel selection for the current group.

C h a p t e r 1 3

D A 7 U s e r s ’ G u i d e

Group

Once the groups have been activated in the

[MUTE GRP]

windows, the window does not have to be displayed when you
want to register a group. Use the mute group selection buttons in
the

[CHANNEL] window to register the channel to a group.

To cancel all the channels assigned to a group, press one of the
SELECT buttons in the group for two seconds or more.