Motorola MVME172 - Manual (Page 107)

LCSR Programming Model
http://www.mcg.mot.com/literature 2-29
2
VMEbus Slave Ending Address Register 2
This register is the ending address register for the second VMEbus to local
bus map decoder.
VMEbus Slave Starting Address Register 2
This register is the starting address register for the second VMEbus to local
bus map decoder.
VMEbus Slave Address Translation Address Offset Register 1
This register is the address translation address register for the first
VMEbus to local bus map decoder. It should be programmed to the local
bus starting address. When the adder is engaged, this register is the offset
value.
ADR/SIZ $FFF40004 (16 bits of 32)
BIT 31 . . . 16
NAME Ending Address Register 2
OPER R/W
RESET 0 PS
ADR/SIZ $FFF40004 (16 bits of 32)
BIT 15 . . . 0
NAME Starting Address Register 2
OPER R/W
RESET 0 PS
ADR/SIZ $FFF40008 (16 bits of 32)
BIT 31 . . . 16
NAME Address Translation Address Offset Register 1
OPER R/W
RESET 0 PS