NewTek TriCaster TC1 (2 RU) User Manual
Page 92

P a g e | 76
For example, the
Alias
entry for the second preset of the second input will be assigned to the
DataLink
key
%PTZ2_Preset2_Alias%.
FIGURE 76
A set of controls located below the
preset bin
allows you to control connected PTZ cameras, or to affect
sources supporting
Pan and Scan
features in similar fashion (you might think of these sources as providing
a sort of
‘virtual PTZ’ functionality).
Note: NewTek NC1 Spark units connected by NDI will show Virtual PTZ (Pan and Scan) controls. With Premium
Access membership, most Switcher sources feature Virtual PTZ.
–
see Appendix A: Premium Access Features.
SLOW, MEDIUM
, and
FAST
preset buttons complement the numeric
Speed
control slider at right. These affect
the speed of the transition from the current position to that stored in a newly selected preset.
The
Options
group, when expanded, reveals
White Balance
options along with a menu that allows you to
invert the operation of the
Joystick
on individual axes (both in the interface and on connected hardware
control surfaces).
Note: Focus, Iris, and White Balance features are only shown when a PTZ cameras is connected to the input.
However features in the Input Configu
ration panel’s Image tab, discussed next, can provide similar
functionality to White Balance automation.