Section 3.8 tally lights – NewTek TriCaster TC1 (2 RU) User Manual
Page 39

P a g e | 23
For rack-mounted systems, additional monitor ports
located just above the SDI inputs on the backplane
are
available to connect monitors or projection devices (etc.) for various purposes, including program output for
IMAG (Image Magnification) installations.
VMC1 supports the use of three such extra displays, while TC1 and 410 Plus each allow two.
FIGURE 14
These supplemental monitors are referred to as
Multiview
outputs, and can display a variety of optional
layouts that can be selected and configured at any time in the
Live Desktop
.
Note: A mismatch of output format and connection type is possible at times. For example, imagery in a
Graphics player may not match the current output resolution or the selected connection type. Display
mismatches can often be handled, but in rare cases the source may simply not be shown.
SECTION 3.8
TALLY LIGHTS
Rack
–
mount
TriCaster models provide
Tally Light
support to allow you to connect external
tally lights and similar devices.
These typically provide a red LED for a v
ideo input selected on the Switcher’s
Program
row.
(NDI outputs also natively support tally over the network, without a separate connection.)
Note: Some third party tally solutions are listed at:
https://www.newtek.com/solutions/newtek-developer-network/
FIGURE 15