B.1.2, Skype tx controller, B.1.3 – NewTek TriCaster TC1 (2 RU) User Manual
Page 312: Tc1 & vmc1, Talkshow direct

P a g e | 296
A
UDIO AND
V
IDEO
C
ONNECTIONS
The basic IP connection setup between the NewTek production system and TalkShow is quite simple.
Individual a/v outputs for each remote Skype caller from TalkShow can be assigned to the
Switcher
and Audio
Mixer
like any other NDI a/v input source.
Similarly, the video output from your program can be assigned as the return-to-caller source on the
TalkShow system. You will likely want to prepare a unique mix minus audio feed for the audio return to each
individual caller. See the sub-heading Sub-
in Section 16.10.3 of this manual for more
detail on configuring these.
B.1.2
SKYPE TX CONTROLLER
A vital part of the Skype TX™ platform is the call
-center application referred to as Skype TX Controller
(available free from https://media.skype.com/skype-tx). You might think of Skype TX Controller as the
‘switchboard’ for your calls. The operator can initiate outgoing calls, answer incoming calls, and more.
FIGURE 358
The Skype TX Controller console provides numerous professional conveniences, including contact and call
management tools, auto-answer, detailed call quality metrics, and fall-back images to be displayed
automatically should network conditions for a remote caller fall below designated minimums.
B.1.3
TC1 & VMC1
–
TALKSHOW DIRECT
In addition to the TalkShow platform
, NewTek’s TriCaster
®
TC1 and IP Series VMC1 both have native Skype
TX capabilities independent of an outboard TalkShow system.