NewTek TriCaster TC1 (2 RU) - Manual (Page 242)

P a g e | 226
22.8.2 LAYER DELEGATES
As mentioned above, some Joystick delegate modes let you further refine the target for
your manipulations. For example, when your primary delegate is MAIN , joystick
operations can be applied to the DSK 1, DSK 2, DSK 3 or DSK 4 video layers. The LAYER
delegate group determines which one will be affected.
Specifically, the KEY buttons labeled 1-4 direct joystick control to DSK 1-4 when MAIN is
selected as the primary delegate, or KEY 1-4 for an M/E . Similarly, when an M/E with a
LiveSet selected as the Background effect is delegated, the A, B, C and D buttons allow you
to target the individual Positioners for the main M/E layers ( A-D ).
Finally, the LIVE SET button targets the position and zoom settings for a virtual set.
22.8.3 CONTROL MODE
Let’s turn now to buttons that govern the Joystick operating mode.
FIGURE 270
POS/SCALE
• Move the joystick horizontally, vertically or diagonally (as viewed from above) to move delegated
video source(s) on its X and Y axes.
• Twist the joystick clockwise to scale delegated source(s) up, or counter-clockwise to scale down.
Hint: When multi-delegate selections are active for the Positioner, adjustments are generally relative to the
current state for individual delegates, as opposed to absolute.
ROT (R OTATE )
• Move the joystick horizontally (as viewed from above) to rotate delegated sources on the Y axis.
• Move the joystick vertically to rotate delegated sources on the X axis.
• Twist the joystick clockwise/counter-clockwise to rotate delegated sources on the Z axis.
CROP
• Twist the joystick clockwise (as viewed from above) to crop delegated sources inward on all four
edges, maintaining the original aspect ratio.
• Twist the joystick counter-clockwise to reduce cropping of delegated sources on all 4 edges.
FIGURE 269