10 layers & effects – NewTek TriCaster TC1 (2 RU) User Manual
Page 267

P a g e | 251
CROP
•
Twist the
joystick
clockwise (as viewed from above) to crop delegated sources inward on all four
edges, maintaining the original aspect ratio.
•
Twist the
joystick
counter-clockwise to reduce cropping of delegated sources on all 4 edges.
•
Move the
joystick
horizontally to crop only the left edge of delegated sources.
•
Move the
joystick
horizontally with the
joystick button
pressed to crop only the right edge of delegated
sources.
•
Move the
joystick
vertically to crop only the top edge of delegated sources.
•
Move the
joystick
vertically with the
joystick button
down to crop the bottom of delegated sources.
RESET
Despite its location,
RESET
is really an action button (not a
Joystick
mode). Press it
to restore all position
settings for currently delegated source(s) to their defaults. (This is also why
RESET
does not stay selected
when pressed, nor does it change the current
Joystick mode
.
Hint: When SHUTTLE is delegated, delegated Media Players are reset to the starting point of the current item
(or playlist). And when delegated to an M/E with LIVE SET enabled in the LAYERS group, the LiveSet is reset to
its default positioning.
23.3.10
LAYERS & EFFECTS:
FIGURE 303
The controls in this group are similar to those in the user interface, performing the same functions in much
the same manner.
T
RANSITION
D
ELEGATE
DELEGATE
buttons determine what
video layers
the main
Take
,
Auto
, and
T-Bar
affect, and the scope of the
Select
and
Rate
knobs. Active
delegate
buttons remain lit. Multiple selections can be performed by pressing
one or more buttons at the same time.