NewTek TriCaster TC1 (2 RU) - Manual (Page 47)

P a g e | 31
2. Monitoring layout presets are listed at the top of
the menu as Interface A through D. Select the
layout labeled A under Multiview 1 (i f it isn’t
already check-marked).
3. By default, this default monitoring pane shows
individual viewports for the various
Switcher
sources.
4. To continue to assign sources, you could select
Configure from an input monitor’s (right -click)
context menu , but let’s take a different approach.
Move your mouse over the viewport for INPUT 1 and notice that a Configure button ( gear icon)
appears at lower right. Click this to open a tabbed settings panel (Figure 24).
Hint: As a quicker way to access the Input configuration panel, simply double-click the viewport; or, for a
touch-screen, tap the viewport with two fingers.
5. Click the Source drop-down menu to see a list of sources you can select. SDI inputs (not a TC Mini
feature) and Black , along with Skype TX Caller connections (count varies by model) are listed first
under the Local heading. Additional NDI sources discovered on your network are grouped below
under source device headings.
For NDI sources, simply making a selection completes the connection. If you choose an SDI source,
further selections may be required.
FIGURE 25
6. The Format menu defaults to Auto-Detect . Generally, this option will suffice. Otherwise, for SDI
sources you can manually select the correct Format (Figure 25).
FIGURE 24