2 record tab, 3 genlock tab – NewTek TriCaster TC1 (2 RU) User Manual
Page 103

P a g e | 87
8.2.2
RECORD TAB
FIGURE 92
Each MIX output source has a corresponding
Record
control group to provide settings and options for
capture. These important capabilities are discussed in full in Chapter 20, Record, Grab, and Replay. The
controls shown in Figure 92 are detailed in Section 20.1.2.
8.2.3
GENLOCK TAB
The
Genlock
feature allows your NewTek system
to ‘lock’ its video output to a reference video signal supplied
to its
Genlock
input connector.
Note: Not a TC Mini feature.
This synchronizes system video output to external equipment locked to the same reference. Genlocking is
not a
requirement
, but it is very beneficial, and you should definitely use it if you have the capability.
Miniscule local timing differences between these may force tiny delays during switching operations, which
can contribute to throughput latency. Thus, serving i) the
Genlock
input and ii) other video devices in the
chain with a single reference is the best approach.
You could think of it this way:
❖
Genlocking your
cameras
has the effect of locking their output together, ensuring optimal
synchronization for live switching. This may result in throughput latency benefits.