NewTek TriCaster TC1 (2 RU) - Manual (Page 254)

P a g e | 238
• Twist the joystick clockwise to scale delegated source(s) up, or counter-clockwise to scale down.
Hint: When multi-delegate selections are active for the Positioner, adjustments are relative to the current state
for individual delegates.
ROT (R OTATE )
• Move the joystick horizontally (as viewed from above) to rotate delegated sources on the Y axis.
• Move the joystick vertically to rotate delegated sources on the X axis.
• Twist the joystick clockwise/counter-clockwise to rotate delegated sources on the Z axis.
Hint : Press SHIFT and rotate the joystick to adjust focus for a delegated PTZ camera.
CROP
• Twist the joystick clockwise (as viewed from above) to crop delegated sources inward on all four
edges, maintaining the original aspect ratio.
• Twist the joystick counter-clockwise to reduce cropping of delegated sources on all 4 edges.
• Move the joystick horizontally to crop only the left edge of delegated sources.
• Move the joystick horizontally with the joystick button pressed to crop only the right edge of delegated
sources.
• Move the joystick vertically to crop only the top edge of delegated sources.
• Move the joystick vertically with the joystick button pressed to crop only the bottom edge of delegated
sources.
RESET
Despite its location, RESET is really an action button (not a Joystick mode). Press it to restore all
(appropriate) position settings for currently delegated source to their defaults. (This is also why RESET does
not stay selected when pressed, nor does it change the current Joystick mode .)
Hint: When SHUTTLE is delegated, delegated Media Players are reset to the starting point of the current item
(or playlist). And when delegated to an M/E with LIVE SET enabled in the LAYERS group, the LiveSet is reset to
its default positioning.
23.1.9 MEDIA PLAYERS
Let’s explore the details of the MEDIA PLAYER control group (depending on your control surface model, there
may be one or two such control groups).