NewTek TriCaster TC1 (2 RU) - Manual (Page 315)

P a g e | 299
APPENDIX C: TC MINI INPUT ADAPTER (TCMI4KUHD)
This appendix briefly describes how TC Mini owners can prepare their new NewTek™ TCMI4KUHD device
for use. First, we ’ ll give you a Quickstart lesson to get you set up quickly and easily (more detailed
information is provided in the next section).
C.1 QUICKSTART
Step 1 – Connecting Your TCMI4KUHD Input Adapter
FIGURE 360
1. Using a CAT-5 (or better) Ethernet cable, connect the TCMI4KUHD device to one of the four PoE
(Power over Ethernet) RJ-49 connectors labeled
NDI1-4 on the rear of your TriCaster TC Mini.
Step 2 – Access the Device Webpage
2. Open the Input Configuration panel for the TriCaster Switcher input you intend to connect this
device to. To do so, right-click on either a Switcher button or the input ’ s monitor viewport and
select Configure in the context menu.
FIGURE 361
3. Click the Source menu at upper-left in the input tab to view available sources.
Hint: Connected TCMI4KUHD devices appear the menu as TCMI4KUHD – (unit serial number) > Channel 1.
4. Select TCMI4KUHD – (serial number) > Channel 1 as the source for the Switcher input.