Section 3.11 configure video inputs – NewTek TriCaster TC1 (2 RU) User Manual
Page 46

P a g e | 30
Figure 21 highlights two tabs labeled
OUTPUTS 1-4
and
5-8
,
located at right just above the main
Switcher
.
Clicking a tab reveals one of two specialized crosspoint panels, which appear in the same place that
M/E
and
PREVIZ
modules are normally shown (Figure 22).
FIGURE 22
You would not be wrong to think of these panels and their associated NDI outputs as integrated
Output Matrix
Routers
, in that their features are very similar to those normally provided by an external SDI
matrix router
.
FIGURE 23
We’ll discuss advanced aspects of these internal
Output Matrix Routers
later (Chapter 15). At this point, when
discussing configuring your system, let’s simply note that you can assign many different
sources to each of
the 8 supplemental NDI outputs in these panes
–
so much so that the source option buttons occupy three
banks of optional sources, similar to the
Switcher
source rows.
SECTION 3.11
CONFIGURE VIDEO INPUTS
Source selection settings for video inputs can be accessed in the
Live Desktop
’s
monitoring section, so let’s
spend a few moments there before continuing.
The individual monitor viewports on the
Live Desktop
can be flexibly assigned to different
Switcher
sources
and outputs. Complete monitor layouts can be stored and recalled using tools located in the
Workspace
menu,
located in the
Dashboard
across the top of the screen.
We’ll look into this
in depth in the
Reference Section
of this manual, but f
or now let’s configure the video
sources you connected earlier (Section 3.5.1).
1.
Click
Workspace
in the
Dashboard
(at the top of the
Live Desktop
).