NewTek TriCaster TC1 (2 RU) - Manual (Page 271)

P a g e | 255
MEM
When the MEM button is held down, pressing a button between 1 and 9 in the selection rows at left causes
corresponding operation in the MEM bin for the delegated M/E as follows:
• Pressing a button in the DSK/KEY row recalls the corresponding MEM .
• Pressing a button in the PGM/A row stores or updates the corresponding MEM .
• Pressing a button in the PREV/B row clears the corresponding MEM .
COMP
The COMP button operates similarly (to MEM , just discussed). When the COMP button is held down, the
columns in the Switcher or M/E rows at left correspond to the COMPs for the delegated bus.
• Pressing a button in the DSK/KEY row recalls the corresponding COMP .
• Pressing a button in the PGM/A row stores or updates the corresponding COMP .
• Pressing a button in the PREV/B row clears the corresponding COMP .
SHOW PREV
This button toggles the Tabs Follow All Delegates option in TriCaster, which in turn causes TriCaster’s M/E
Preview viewports to update when a new M/E DELEGATE selection is made.
PTZ C ONTROL
PTZ SEL
Hold this button down and press a numbered button in the KEY row at left to designate which camera to
control.
Note: Depending on TriCaster model and feature set, PTZ (pan-tilt-zoom) style operations a re not limited to ‘real’
PTZ cameras. Static cameras, Media Players, and Buffers are among the different source types that may benefit
from ‘virtual PTZ’ functionality. And of course M/Es have similar capabilities courtesy of their COMP and Positioner
features. For this reason, you can delegate any source that is qualified for Joystick control on your system using
the PTZ SEL button.
PST STORE
Hold this button down and press a numbered button in the KEY row at left to store the current PTZ position
for the currently selected camera to the designated PTZ preset.
PST CALL
Hold this button down and press a numbered button in the KEY row at left to recall the designated PTZ preset
for the currently selected PTZ camera.