Fujitsu Ricoh Fujitsu fi-7900 Image Scanner - Manual (Page 99)

How to Use Function Selection
This section explains the Function Selection.
When you press the [Function/Enter] button in the [Ready] screen, [Function Selection] is displayed.
By using Function Selection, you can configure an application to be launched when the [Send to]
button is pressed.
1 Press the power button on the front of the scanner.
[Ready] is displayed on the LCD.
The indicator displays [F01] when the power has just been turned on.
2 Press the [Function/Enter] button to confirm.
[Function Selection] is displayed on the LCD.
3 Press the [ ] or [ ] button and select a parameter, then press the [Function/Enter] button to
confirm.
For details about the settings, refer to
Item Configurable in Function Selection (page 101) .
The setup is completed when the LCD displays the [Ready] screen.
The configured parameter is shown by the indicator.
In this example, the indicator displays [F02].
How to Use the Operator Panel
99