Fujitsu Ricoh Fujitsu fi-7900 Image Scanner - Manual (Page 184)

Scanning Does Not Start
Check the following points
● Are the documents set on the hopper correctly? (page 184)
● Is the ADF closed properly? (page 184)
● Is the interface cable connected correctly? (page 184)
● Is the connector on the interface cable broken? (page 184)
If the problem persists, check the items in Before You Contact the Scanner Service Provider
(page 199) first, then contact the distributor/dealer where you purchased this product. Refer
to the contact information in the Contact List or the Contact for Inquiries section in Safety
Precautions bundled with this product and make an inquiry.
●
Are the documents set on the hopper correctly?
Solution
Reload the documents on the hopper.
●
Is the ADF closed properly?
Solution
Remove documents from the hopper, then open and close the ADF.
●
Is the interface cable connected correctly?
Solution
Connect the interface cable correctly.
For details, refer to Getting Started.
●
Is the connector on the interface cable broken?
Solution
Use a new interface cable.
Troubleshooting
184