Fujitsu Ricoh Fujitsu fi-7900 Image Scanner - Manual (Page 82)

How to Use the Main Menu
This section explains the Main Menu.
When you press the [Menu] button in the [Ready] screen, the [Main Menu] screen is displayed.
The Main Menu can be used to configure various operational settings upon scanning.
This section explains how to use the Main Menu of the operator panel according to the following
categories.
Operation Description Setting Item
Operational
Settings You can configure various settings for operating
the scanner and using the operator panel.
For more details about settings, refer to
Operational Settings (page 84) .
1: iMFF Setting
2: No. of Paper Feed Retries
3: Pick Speed
4: Soft Pick Setting
5: Manual Feed Timeout
6: Paper Protection
7: MF Quick Change
8: Alarm Volume
9: Stacker Positioning
10: Hopper Level
11: Paper Separation Force
12: Alarm Sound Time
13: Button Sound Vol
14: Contrast
15: Backlight ON
16: LED Blink Cycle
17: Horizontal Scroll Speed
18: Operation Panel Timeout
19: Language
20: Prioritize Panel Settings
24: Ope. Panel Initialization
26: Low-speed Feed Mode
27: Automatic Separation
Control
28: Stacking Control
Cleaning the
scanner You can clean the scanner by using materials such
as the Cleaning Sheet.
For more details, refer to
Daily Care (page 121) .
21: Cleaning
Test print for
Imprinter You can run a test print when the imprinter is
installed.
For more details, refer to the "fi-680PRF/PRB
Imprinter Operator's Guide". 22: Test Print
How to Use the Operator Panel
82