Replacing the pick roller, Caution – Fujitsu Ricoh Fujitsu fi-7900 Image Scanner User Manual
Page 145
Replacing the Pick Roller
Replace the pick roller in following procedure.
HINT
There are two pick rollers. Make sure to replace both units.
1
Turn off the scanner, unplug the power cable and wait for at least 15 minutes.
For details, refer to
How to Turn the Power OFF (page 22)
.
2
Remove all documents from the stacker.
3
Open the ADF.
For details, refer to
CAUTION
When the ADF is open, it might close accidentally. Be careful not to get
your fingers caught.
4
Remove the pick rollers (× 2) from the scanner.
a
Open the roller cover.
Grab the tabs on the left and right side with your fingers and pull down the cover
towards you.
Replacing the Consumables
145