Fujitsu Ricoh Fujitsu fi-7900 Image Scanner - Manual (Page 101)

Item Configurable in Function Selection
Item Description Setting Factory
Default
Functio
n
Selectio
n Configure the application(s) to be
launched by the [Send to] button.
It displays the scanner button events
configured in the computer ([Send to 1] to
[Send to 50]).
For information on how to configure
scanner button events, refer to
Using a
Button on the Scanner to Start Scanning
(page 113)
.
No.01 to No.50/No.C
(No.C indicates the Software
Operation Panel.) (*1)
*1:Although there is no factory default setting, it is set to [No.01] when you turn on the power.
Therefore, the setting does not change even when you initialize the operator panel.
How to Use the Operator Panel
101