Fujitsu Ricoh Fujitsu fi-7900 Image Scanner User Manual
Page 219
Item
Description
Setting/Value
Factory Default
scanned image to fill in
black or white.
The margins are filled in
white when the
background is white, and
filled in black when the
background is black.
It can also be configured
from the scanner driver's
setup dialog box. Note that
priority is given to the
setting with a larger value.
(in increments of 0.5 mm)
(A: Image, B: Filled area, A
+B: Output)
Document check
area specification
for Multifeed
Detection
Selected range: Select this
item to restrict the area to
run multifeed detection on.
[Selected range] check box
Not selected
Enable/Disable (Left/
Middle/Right): Specify
whether to enable or
disable multifeed detection
for the specified area.
Enable / Disable
(when [Selected range] is
selected)
Disable
Start: Specify the start
point of the check area in
length (mm) from the top
edge of the document.
0 to 510 mm (in increments
of 2 mm)
0 mm
End: Specify the end point
of the check area in length
(mm) from the top edge of
the document.
0 to 510 mm (in increments
of 2 mm)
0 mm
Intelligent
Multifeed
Function
When there is paper of the
same size attached to a
designated location on the
page, configure the
scanner to memorize the
location of the attachment
and not detect multifeeds
for that location.
Note that you first need to
select [Check Overlapping
(Ultrasonic)] for the
multifeed detection setting
in
Manual mode / Auto mode
1 / Auto mode 2
Manual mode
Operational Settings
219