Fujitsu Ricoh Fujitsu fi-7900 Image Scanner - Manual (Page 98)

Item Description Setting/Value Factory Default
- : No settings/values
maintenance parts /
regular maintenance
*1:Although there is no factory default setting, it is set to [1: Movable] when you turn on the
power. Therefore, the setting does not change even when you initialize the operator panel.
*2:Although there is no factory default setting, it is set to [4: Lower] when you turn on the power.
Therefore, the setting does not change even when you initialize the operator panel.
*3:When you display this screen, the parameter currently selected is not highlighted but the
parameter on the top is highlighted.
To check which parameter is currently selected, check whether is displayed or not on the
indicator.
If is displayed on the indicator, [1: Paper Protection] is currently selected. If is not displayed
on the indicator, [2: Clear] is currently selected. For information about the indicator, refer to
About the Indicators (page 79) .
*4:Although there is no factory default setting, the settings are configured as follows when you
turn on the power:[2:Multiple sheets] for [No. of sheets scanned], [1: Front Side] for [Print], [1:
(L)ABCDEFGHIJKLMNOPQRSTUVWXYZ[ ]^_`00000000] for [Print Pattern], and [1:Yes] for [Test
Print]. Therefore, the settings do not change even when you initialize the operator panel.
*5:[Print:1:Front Side / 2:Back Side] does not appear unless both Front-Side and Back-Side
Imprinters are installed.
*6:Although there is no factory default setting, it is set to [2: No] when you turn on the power.
Therefore, the setting does not change even when you initialize the operator panel.
How to Use the Operator Panel
98