Fujitsu Ricoh Fujitsu fi-7900 Image Scanner - Manual (Page 92)

Item Description Setting/Value Factory Default
- : No settings/values
position (disabling the Soft Pick
Setting).
It can also be configured from the
Software Operation Panel.
5: Manual
Feed
Timeout Specify the waiting time to clear
Manual Feed mode.
It can also be configured from the
Software Operation Panel. 5, 10, 20, 30, 40, 50, 60,
70, 80, 90, 100, 110,
120, 180, 240, 300, 360,
420, 480, 540, 600, 900,
1200, 1500, 1800, 1999
(seconds) 10
6: Paper
Protection Specify whether to enable or disable
Paper Protection.
Enabling this setting reduces the risk
of having your documents damaged
in such ways, by stopping the scan
when the scanner detects a document
that is unusually warped.
You can specify the sensitivity to
detect an abnormal feeding of
documents when Paper Protection is
enabled.
Documents are deformed (e.g.
warped, bent, creased) when they are
not being fed by the rollers properly.
To detect such a symptom and stop
the scan, select [1:Low] to only detect
documents that are highly deformed,
and [3:High] to also detect documents
that are slightly deformed.
Paper Protection is disabled in Manual
Feed mode.
Enable/Disable can also be configured
from the scanner driver's setup dialog
box or the Software Operation Panel.
Note that priority is given to the
scanner driver setting unless you have
prioritized the operator panel setting.
Sensitivity can also be configured
from the Software Operation Panel.
Note that if you have prioritized the 1: Enable
2: Disable
Sensitivity:
1: Low
2: Normal
3: High 2: Disable
Sensitivity:
2: Normal
How to Use the Operator Panel
92