Fujitsu Ricoh Fujitsu fi-7900 Image Scanner - Manual (Page 245)

Paper Feeding Operation Setting [Soft Pick Setting]
When you experience pick errors from the separator roller slipping on the paper, or paper jams from
scanning thin papers of small widths, the symptom may be improved by bringing down the pick roller
unit and keeping the unit at the lower position (disabling the Soft Pick Setting).
1 Start up the Software Operation Panel.
Refer to
Starting Up the Software Operation Panel (page 202) .
2 From the listing on the left, select [Device Setting 2] → [Soft Pick Setting].
3 Specify whether to enable or disable [Soft Pick Setting].
Select [Disable] to reduce pick errors and paper jams, by lowering the pick roller.
ATTENTION
Skews and multifeeds may occur when you perform scanning with the soft pick setting
disabled.
Use [Enable] for normal scanning.
HINT
This setting can also be configured from the operator panel.
Operational Settings
245