Fujitsu Ricoh Fujitsu fi-7900 Image Scanner - Manual (Page 91)

Items Configurable in the Main Menu
Item Description Setting/Value Factory Default
- : No settings/values
1: iMFF
Setting When there is paper of the same size
attached to a designated location on
the page, configure the scanner to
memorize the location of the
attachment and not detect multifeeds
for that location.
Note that you first need to select
[Check Overlapping (Ultrasonic)] for
the multifeed detection setting in
Specifying a Multifeed Detection
Method [Multifeed] (page 263)
or the
scanner driver's setup dialog box.
By selecting [4: Clear pattern], you can
clear the overlapping patterns
(length, location) that were previously
memorized in Auto mode.
It can also be configured from the
Software Operation Panel.
1: Manual mode
2: Auto mode 1
3: Auto mode 2
4: Clear pattern 1: Manual mode
2: No. of
Paper Feed
Retries Configure this setting to change the
number of feeding retries when a
pick error occurs.
It can also be configured from the
Software Operation Panel. 1 to 12 (times) 3
3: Pick Speed When you experience frequent
multifeeds and paper jams, the
symptom may be improved by
slowing down the speed at which the
documents are fed (pick speed).
It can also be configured from the
Software Operation Panel.
1: Normal
2: Slow 1: Normal
4: Soft Pick
Setting When you experience pick errors from
the separator roller slipping on the
paper, or paper jams from scanning
thin papers of small widths, the
symptom may be improved by
bringing down the pick roller unit
and keeping the unit at the lower 1: Disable
2: Enable 2: Enable
How to Use the Operator Panel
91