Fujitsu Ricoh Fujitsu fi-7900 Image Scanner - Manual (Page 218)

Item Description Setting/Value Factory Default
Multifeed
detection when
scanning in
manual feeding
mode Specify this item to enable
multifeed detection during
manual feeding. Disable / Follow driver
settings Disable
Page Edge Filler
(ADF) Specify a width for the
margin off the edge of the
scanned image to fill in
black or white.
The margins are filled in
white when the
background is white, and
filled in black when the
background is black.
It can also be configured
from the scanner driver's
setup dialog box. Note that
priority is given to the
setting with a larger value. Top/Left/Right: 0 to 15 mm
Bottom: -7 to 7 mm (in
increments of 1 mm)
(A: Image, B: Filled area, A
+B: Output)
Top/Bottom/Left/
Right: 0 mm
Dropout color Select a color to be
dropped out from the
scanned image (black &
white/grayscale only).
It can also be configured
from the scanner driver's
setup dialog box. Note that
priority is given to the
scanner driver setting. Red / Green / Blue / None Green
Pre-Pick Select [Yes] to prioritize the
processing speed and [No]
for otherwise.
It can also be configured
from the scanner driver's
setup dialog box. Note that
priority is given to the
scanner driver setting. Yes / No Yes
Page Edge Filler
(Automatic Page
Size Detection) Specify the range of area to
fill in when [Automatic
Page Size Detection] is
selected.
Specify a width for the
margin off the edge of the Top/Bottom/Left /Right: 0
to 7.5 mm Top/Bottom/Left/
Right: 0 mm
Operational Settings
218