Imprinter settings [imprinter selection – Fujitsu Ricoh Fujitsu fi-7900 Image Scanner User Manual
Page 279
Imprinter Settings [Imprinter selection]
Specify which imprinter to use when both the Front-Side Imprinter and Back-Side Imprinter are
installed.
This setting does not appear when no imprinter is installed.
1
Start up the Software Operation Panel.
Refer to
Starting Up the Software Operation Panel (page 202)
.
2
From the listing on the left, click [Device Setting 2]
→
[Imprinter selection].
3
Select the Imprinter to use.
Normal (obey Host specification)
Follows the scanner driver setting.
Forcibly Select Front-Side Imprinter
Forces the Front-Side Imprinter to be used unless specified otherwise by the scanner driver.
Forcibly Select Back-Side Imprinter
Forces the Back-Side Imprinter to be used unless specified otherwise by the scanner driver.
HINT
●
For information about Imprinters, refer to
.
●
This setting can also be configured in the scanner driver's setup dialog box. When [Normal
(obey Host specification)] is selected, priority is given to the scanner driver settings. When
Operational Settings
279