Fujitsu Ricoh Fujitsu fi-7900 Image Scanner - Manual (Page 221)

Item Description Setting/Value Factory Default
(in increments of 10,000)
Set the interval
for feeding sheets If the bottom of the
scanned image is partially
missing due to a large skew
when scanning in
Automatic Page Size
Detection, specify a longer
interval to feed the
documents.
Specifying a longer interval
leaves more time between
each document to be
scanned. Short (default) - Long
(1 to 4 levels) Short (default)
Pick Speed When multifeeds or paper
jams occur frequently, the
symptom may be improved
by slowing down the speed
(pick speed) in which the
documents are fed.
It can also be configured
from the operator panel. Normal / Slower Normal
Soft Pick Setting When you experience pick
errors from the separator
roller slipping on the
paper, or paper jams from
scanning thin papers of
small widths, the symptom
may be improved by
bringing down the pick
roller unit and keeping the
unit at the lower position
(disabling the Soft Pick
Setting).
It can also be configured
from the operator panel. Enable / Disable Enable
AutoCrop
Boundary Specify whether or not to
optimize (round up/down)
the fractional part of the
scanned image data. Normal / Optimize Normal
Auto color
Detection Specify the slice level for
Auto Color Detection. 1 to 255 levels 5
Operational Settings
221