Fujitsu Ricoh Fujitsu fi-7900 Image Scanner - Manual (Page 217)

Device Setting 2
1 Start up the Software Operation Panel.
Refer to
Starting Up the Software Operation Panel (page 202) .
2 From the list on the left, select [Device Setting 2].
Click an item in the listing on the left to display the details of the settings (parameters) on the
right.
The [Default] button resets the settings to the factory default.
The [Save] button saves to a file the values configured in the Software Operation Panel.
The [Restore] button restores from a file the saved values that were configured in the Software
Operation Panel.
Items that can be configured in the above dialog box are as follows:
Item Description Setting/Value Factory Default
Multifeed Specify a method for
multifeed detection. Detect
by monitoring overlapping,
document length, or a
combination of both.
It can also be configured
from the scanner driver's
setup dialog box. Note that
priority is given to the
scanner driver setting. None / Check Overlapping
(Ultrasonic) / Check
Length / Check Overlapping
and Length
Length (when detecting
from the length difference,
select from 10/15/20 mm) Check
Overlapping
(Ultrasonic)
Operational Settings
217