Fujitsu Ricoh Fujitsu fi-7900 Image Scanner - Manual (Page 163)

Errors
●
Error Code
When an error occurs in the scanner, the Check LED lights in orange and an error code appears on
the LCD of the scanner's operator panel.
You can clear the error display by pressing the [Clear/Back] or the [Stop] button.
Note that for a paper jam, the message disappears after a certain amount of time elapses with no
documents ([Ready] status) in the scanner.
ATTENTION
When you scan a lot of documents written with lead pencil, the following message may appear:
" Clean the consumables (brake roller, separator roller and pick roller) because they may be
dirty. Also try pressing the button to lower the paper separation force when [Ready] is
displayed. If this message keeps on appearing, replace the consumables. Refer to the manual for
information on how to clean or replace the consumables. "
This message only appears on the operator panel without an error code.
Troubleshoot as instructed in the message.
Troubleshooting
163