Fujitsu Ricoh Fujitsu fi-7900 Image Scanner - Manual (Page 223)

Item Description Setting/Value Factory Default
detects a document that is
unusually warped.
Paper Protection is disabled
in Manual Feed mode.
It can also be configured
from the scanner driver's
setup dialog box or the
operator panel. Note that
priority is given to the
scanner driver setting
unless you have prioritized
the operator panel setting.
Paper Protection
Sensitivity Sensitivity Setting: you can
specify the sensitivity to
detect an abnormal
feeding of documents
when Paper Protection is
enabled.
It can also be configured
from the operator panel.
Note that you can prioritize
the operator panel setting. Low / Normal / High Normal
Detection Range: you can
specify the range to detect
an abnormal feeding of
documents when Paper
Protection is enabled. Normal / Large Normal
Scan Setting for
Document with
Tab (Automatic
Page Size
Detection) For documents with index
tabs or index stickers
attached on the bottom of
the page, you can keep the
tab (index or index stickers)
on the scanned image
when scanning in
Automatic Page Size
Detection. Specifying
[Document with tab] shows
the image of the tab, but
slows down the scanning
speed. Document with tab /
Document without tab /
Non-rectangular document Document
without tab
Maintenance and
Inspection Cycle Specify the cycle for
scanner maintenance and Disable / Enable Disable
Operational Settings
223