Fujitsu Ricoh Fujitsu fi-7900 Image Scanner - Manual (Page 97)

Item Description Setting/Value Factory Default
- : No settings/values
1: Yes
2: No
23: Show/
Clear
Counters Check the replacement cycle of the
consumables and the total page count
of the maintenance parts.
Also use it to reset the counter when
you have replaced the consumables or
performed cleaning. Brake Roller / Pick
Roller / Separator
Roller / Assist Roller /
Cleaning / Total sheets
scanned 0
Ink Level:Front/Ink
Level:Back (when the
imprinter option is
installed) Only displayed
when imprinter is
installed
24: Ope.
Panel
Initialization Initialize the settings of the operator
panel,
except for the language setting and
any items without a factory default
setting. 1: Yes
2: No (*6)
25: Doc
Counting
Mode Compare the number of sheets
scanned in Doc Counting Mode and
Doc Count Check Mode. — —
26: Low-
speed Feed
Mode Select whether to perform a slow
scanning speed, in order to protect
the documents.
It can also be configured from the
Software Operation Panel. 1: Enable
2: Disable 2: Disable
27:
Automatic
Separation
Control Select whether to control the paper
separation force automatically for
each document type.
It can also be configured from the
Software Operation Panel. 1: Enable
2: Disable 1: Enable
28: Stacking
Control Set the control for ejecting
documents when scanning documents
with a document length of 138 mm or
shorter.
It can also be configured from the
Software Operation Panel. 1: Stackability
Emphasis
2: Normal
3: Speed Emphasis 2: Normal
Information [Information] appears as an item in
[Main Menu] only when is
displayed on the LCD.
Message for replacing
consumables /
cleaning / replacing Only displayed
when there is
information
How to Use the Operator Panel
97