Fujitsu Ricoh Fujitsu fi-7900 Image Scanner - Manual (Page 265)

Setting for Multifeed Detection in Manual Feeding [Multifeed detection
when scanning in manual feeding mode]
Configure this setting when you want to enable multifeed detection for scanning in Manual Feed
mode.
1 Start up the Software Operation Panel.
Refer to
Starting Up the Software Operation Panel (page 202) .
2 From the listing on the left, select [Device Setting 2] → [Multifeed detection when scanning in
manual feeding mode].
3 Select a detection method.
Detection Description
Disable Does not detect multifeeds.
Follow driver settings Detects multifeeds if multifeed detection is
enabled in the scanner driver settings.
Operational Settings
265