Fujitsu Ricoh Fujitsu fi-7900 Image Scanner - Manual (Page 274)

Settings Related to Waiting Time
Setting the Waiting Time for Manual Feeding [Timeout for manual
feeding]
When you scan by manually loading one sheet at a time (Manual feeding mode), you can specify the
waiting time (interval) for feeding the next sheet, in which scanning can be continued.
When the specified time elapses, the scan is automatically stopped and manual feeding is canceled.
To cancel Manual Feeding mode immediately, press the [Counter Reset] button during the timeout
period.
1 Start up the Software Operation Panel.
Refer to
Starting Up the Software Operation Panel (page 202) .
2 From the listing on the left, click [Device Setting 2] → [Timeout for manual feeding].
3 Specify a value of the timeout for manual feeding.
To enable the timeout setting, select the timeout period for manual feeding until loading the
next document after the previous one.
HINT
● The scanner waits for the period of manual feed timeout even if scanning starts with no
document loaded on the hopper.
Operational Settings
274