Fujitsu Ricoh Fujitsu fi-7900 Image Scanner - Manual (Page 216)

Item Description Setting/Value Factory Default
Also use it to reset the
counter when you have
replaced the consumables
or performed cleaning.
Ink Level:Front / Ink
Level:Back
(when the imprinter option
is installed) Only displayed
when imprinter is
installed
Power saving Specify the waiting time
before entering power
saving mode. Range: 5 min. to 115 min.
(in increments of 5 min.) 15 min.
Power off after a certain
period of time: Select to
have the scanner turn off
automatically when it is
turned on and left unused
for a certain period of time.
Also, specify the time until
power-off. [Power off after a certain
period of time] check box Selected
1 Hour/2 Hours/4 Hours/8
Hours
(when the [Power off after
a certain period of time]
check box is selected) 4 Hours
Offset Setting Adjust the position to start
scanning for the specified
scanning side(s). Unit:
ADF (Front) / ADF (Back)
Main/Sub: -2 to 3 mm (in
increments of 0.5 mm) Main/Sub: 0 mm
Vertical
magnification
Adjustment Adjust the magnification
level in the feeding
direction for the specified
scanning method. Unit: ADF
Range: -3.1 to 3.1% (in
increments of 0.1%) 0%
Operational Settings
216