Fujitsu Ricoh Fujitsu fi-7900 Image Scanner - Manual (Page 124)

Cleaning the ADF (with Cleaning Sheet)
Use the Cleaning Sheet to clean the rollers on both the upper and lower sides of the paper path.
For more details about the Cleaning Sheet, refer to
Cleaning Materials (page 121) .
Cleaning with the Cleaning Sheet
1 Press the power button on the front of the scanner.
[Ready] is displayed on the LCD.
2 Press the [Menu] button.
[Main Menu] is displayed on the LCD.
3 Press the [ ] or [ ] button and select [21: Cleaning], then press the [Function/Enter] button to
confirm.
[Cleaning] is displayed on the LCD.
4 Press the [ ] or [ ] button and select [1: Sheet], then press the [Function/Enter] button to
confirm.
A message is displayed on the LCD.
ATTENTION
Do not start scanning with an image scanning application during cleaning.
5 Set the width of the hopper side guides to B4.
For details, refer to
Loading Documents (page 48) .
6 Adjust the stacker extension to the length of the Cleaning Sheet, and pull up the paper stop.
For details, refer to
Setting Up the Stacker (page 34) .
7 Remove the protective paper from the Cleaning Sheet.
Daily Care
124