Fujitsu Ricoh Fujitsu fi-7900 Image Scanner - Manual (Page 143)

Replacing the Consumables
This section explains how to replace the consumables for the scanner.
CAUTION
The inside of the ADF becomes very hot when the scanner is being used.
Before you replace the consumables, make sure to turn off the power, unplug
the power cable and wait for at least 15 minutes for the inside of the ADF to cool
down.
Consumables and Replacement Cycles
Name Part No. Suggested Replacement Cycle
PICK ROLLER PA03575-K011 600,000 sheets or one year
SEPARATOR ROLLER PA03800-K012 600,000 sheets or one year
BRAKE ROLLER PA03575-K013 600,000 sheets or one year
PRINT CARTRIDGE (*1) CA00050-0262 4,000,000 characters or less (this may
be less depending on the font
specified)
Consumables need to be replaced periodically. It is recommended that you keep a stock of new
consumables and replace them before it reaches the end of the consumable life. The scanner
records the number of sheets scanned for each consumable (pick roller, separator roller, and brake
143