Fujitsu Ricoh Fujitsu fi-7900 Image Scanner - Manual (Page 142)

As a guideline, pressing the [Scan/Pause] button seven times will rotate the feed
rollers/assist rollers one revolution.
4 Close the hopper/ADF/top cover.
For information on how to close the hopper, refer to
How to Close the Hopper (page 25) .
For information on how to close the ADF, refer to How to Close the ADF (page 29) .
For information on how to close the top cover, refer to How to Close the Top Cover (page 31) .
CAUTION
Be careful not to get your fingers caught when closing the ADF/top cover.
ATTENTION
Confirm that the ADF is closed properly. Otherwise, documents may not be fed into the ADF.
5 Press the [Stop] button.
Cleaning is completed.
6 Reset the cleaning counter.
Use one of the following methods to reset the counter.
● Select [23: Show/Clear Counters] from [Main Menu] on the operator panel, then reset the
counter.
For details, refer to
Checking and Resetting the Counters (page 85) .
● Start up the Software Operation Panel and reset the counter.
For details, refer to
Resetting the Sheet Counters (page 228) .
Daily Care
142