Fujitsu Ricoh Fujitsu fi-7900 Image Scanner - Manual (Page 118)

Operational Procedure
1 After a multifeed error occurs, either press the [Eject] button to eject the document from the
paper path, or open the ADF to remove the document.
When the document is removed, the display on the operator panel LCD changes as follows:
Upon multifeed Upon ejecting document
Multifeed detected (Overlap)
Press the iMFF button to eject the document and to suppress
multifeed detection from next scans.
Press the Eject button to eject the document.
When [Ready] is displayed, increase the paper separation force by
using the [ ] button to suppress multifeeds. (*1)
[Ready (Multifeed)] screen
Multifeed detected (Overlap)
Press the Eject button to eject the document.
When [Ready] is displayed, increase the paper separation force by
using the [ ] button to suppress multifeeds. (*1)
Multifeed detected (Overlap)
Press the iMFF button to memorize the multifeed pattern and
eject the document. Press the Eject button to eject the document.
When [Ready] is displayed, increase the paper separation force by
using the [ ] button to suppress multifeeds. (*1)
Multifeed detected (Overlap)
Press the iMFF button to memorize the multifeed pattern. Press
the Eject button to eject the document.
When [Ready] is displayed, increase the paper separation force by
using the [ ] button to suppress multifeeds. (*1)
Multifeed detected (Length)
Press the Eject button to eject the document. [Ready] screen
*1:When the paper separation force is set to [ ] which is the maximum level, the
message "When [Ready] is displayed, increase the paper separation force by using the [ ]
button to suppress multifeeds." does not appear.
2 Place the removed document back on the hopper.
If a multifeed error is detected while no paper is attached on the document, press the [Scan/
Pause] button or restart scanning via the computer (do not press the [iMFF] button). If there is a
Various Ways to Scan
118