Fujitsu Ricoh Fujitsu fi-7900 Image Scanner - Manual (Page 224)

Item Description Setting/Value Factory Default
inspection to be performed
by a service engineer.
When the specified time
period elapses since the last
periodical maintenance and
inspection, a message for
periodical maintenance
appears. Maintenance/Inspection
cycle: 1 to 12 months
Overscan Control Outputs the image in the
optimum position when
the image is partially
missing due to a large
skew.
Normal / Optimize
Black frame thickness:
Thin (Default) to Thick
(level 1 to 3) Normal
Low-speed Feed
Mode Select whether to perform
a slow scanning speed, in
order to protect the
documents.
It can also be configured
from the operator panel. Disable / Enable Disable
Automatic
Separation
Control Select whether to control
the paper separation force
automatically for each
document type.
It can also be configured
from the operator panel. Disable / Enable Enable
Stacking Control Set the control for ejecting
documents when scanning
documents with a
document length of 138
mm or shorter.
It can also be configured
from the operator panel. Stackability Emphasis /
Normal / Speed Emphasis Normal
Operational Settings
224