Fujitsu Ricoh Fujitsu fi-7900 Image Scanner - Manual (Page 272)

Specifying an Area Not to Detect Multifeed [Intelligent Multifeed
Function]
When there is paper of the same size attached to a designated location on the page, the scanner can
memorize the location of the attachment and can be configured not to detect multifeeds for that
location. To configure this setting, you first need to select [Check Overlapping (Ultrasonic)] for the
multifeed detection setting in
Specifying a Multifeed Detection Method [Multifeed] (page 263) or the
scanner driver's setup dialog box.
1 Start up the Software Operation Panel.
Refer to
Starting Up the Software Operation Panel (page 202) .
2 From the list on the left, select [Device Setting 2] → [Intelligent Multifeed Function].
3 Select an operation mode and click the [OK] button.
Mode Description
Manual mode Specify whether to stop feeding the
documents when a multifeed is detected or
resume the scan by loading the documents
back on the hopper.
The size and location of the paper attachment
are not memorized.
Operational Settings
272