Hardy HI 3010 Filler/Dispenser Controller - Manual (Page 98)

HI-3010 Filler/Dispenser/IBC 82
Service Manual
the right arrow indicating that OK to Fill is mapped
to something. (See Fig. 6-50)
Step 11. To Map other items repeat steps 1-8 for those items
you want to map.
FIG. 6-50 OK TO FILL MAP INDICATION
Step 12. To check what Items are mapped to which Input or
what Outputs are mapped to which Item, just go to
the Basic I/O Mapping Menu, select the Destination
you want to see and press Enter. The mapped data is
readily available.
Unmapping Procedures for Front Panel
Step 1. To Unmap Items go to the Basic I/O Mapping
Menu.
Step 2. Press the up or down arrow buttons until the cursor
is in front of the Item you want to unmap. In our
example we used “OK to Fill”.
Step 3. Press the Enter button. The “OK to Fill” Menu
appears. (See Fig. 6-51)
FIG. 6-51 OK TO FILL MENU/INPUT 1 MAPPED
Step 4. Press the Enter button. The Item Selection Menu
appears with the cursor in front of Not Mapped
(Default). (See Fig. 52)
FIG. 6-52 ITEM SELECTION/SELECTING NOT
MAPPED
Step 5. Press the enter button to set the entry.
Step 6. Press the Exit button to return to the OK to Fill
Menu. (See Fig. 6-53)
FIG. 6-53 OK TO FILL MENU/ITEM UNMAPPED
Step 7. Press on the Exit button to return to the Basic I/O
Mapping Menu. (See Fig. 6-54) Notice that the
asterisk no longer appears. This tells you that the
item is unmapped.
FIG. 6-54 BASIC I/O MAPPING/OK TO FILL
UNMAPPED
Step 8. If you want to unmap more items just repeat steps
1-7.
>
“OK t o Fil l ”
ITEM Input 1 - >
>
“OK t o Fil l ”
ITEM Not Mapped - >
>
BASIC I/ O MAPPING
St op - >
OK t o Fil l - >
Cl ear Al ar m - >